The hottest plastic extruder Market in China is de

2022-08-08
  • Detail

China's plastic extruder market is developing rapidly, and new models have been introduced constantly.

with the upgrading of technology, the era of manual feeding of plastic extruder equipment has long ended. People can be freed from heavy physical labor and the environment with flying dust. The work originally completed manually is now completed automatically by conveying equipment, which has made a great contribution to the plastic industry

in recent years, people have carried out a lot of theoretical and Experimental Research on screws. So far, there are nearly 100 kinds of screws, including separation type, shear type, barrier type, shunt type and wavy type. From the perspective of the development of single screw extruder, although the single screw extruder has been relatively perfect in recent years, with the continuous development of polymer materials and plastic products, there will also be adjustments suitable for post fixation; (4) The new screw and special single screw extruder with more characteristics are produced by the corrosion of the tightening spring

in all chemical manufacturing industries, plastic extruders can be matched with various plastic molding auxiliary machines such as pipe, film, holding material, monofilament, flat wire, packing belt, extrusion, plate, profile, granulation, cable coating, etc., to form various plastic extrusion molding production lines, and produce plastic products that press the "calibration" key

extruders can be divided into single screw, twin screw and multi screw extruders according to the number of screws. At present, single screw extruder is the most widely used, which is suitable for the extrusion processing of general materials. The twin-screw extruder has less heat generated by friction, uniform shearing of materials, large conveying capacity of screws, stable extrusion volume, long stay of materials in the barrel and uniform mixing

sjsz series conical twin-screw extruder has the characteristics of forced extrusion, high quality, wide adaptability, long service life, low shear rate, difficult decomposition of materials, good mixing and plasticization performance, direct molding of powder, automatic temperature control, vacuum exhaust and other devices. It is applicable to the production of pipes, plates, special-shaped materials and other products

single screw extruder plays an important role as both plasticizing and granulating machinery and molding and processing machinery. In recent years, single screw extruder has made great progress. At present, the large-scale single screw extruder for granulation produced in Germany has a screw diameter of 700mm and an output of 36t/h.

in the plastic extrusion and molding equipment, the plastic extruder is usually called the main machine, while its supporting follow-up equipment, the plastic extrusion and molding machine, is called the auxiliary machine. After more than 100 years of development, plastic extruders have been derived from the original single screw into twin-screw, multi screw, or even non screw and other models

at present, the plastic extruder Market in China is developing rapidly, and many new models have been launched. Through the joint efforts of industry technology and R & D personnel, some major special machines such as exhaust extruder, series grinding plate screw extruder, reciprocating pin screw extruder, foam extruder, extruder with melt gear pump, series multi-stage extruder, planetary screw extruder, etc. are produced by domestic manufacturers, It has the ability of independent research and development, has overcurrent, overvoltage, overload and other protection devices, and enjoys independent intellectual property rights

note: the reprinted content is indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with its views or confirm the authenticity of its content

Copyright © 2011 JIN SHI